Click on image for larger image

SPECIFICATIONS:

1. CAPACITY: TABULATED
2. TOLERANCE: SHALL BE INDICATED BY ONE OF THE FOLLOWINGING SUFFIXS; NONE ±20%, K ± 10%, J ± 5%, H±3%, G±2%, AND F ± 1%.
3. WORKING VOLTAGE: TABULATED.
4. DISSIPATION FACTOR: LESS THAN 0.1% AT 1KHz AND 25°C
5. INSULATION RESISTANCE: SHALL EXCEED 250,000 MEG/MFD., AFTER TWO MINUTE CHARGE AT THE RATED VOLTAGE AND 25°C., NEED NOT EXCEED 500,000 MEGOHMS.
6. DIELECTRIC STRENGTH: SHALL WITHSTAND A SURGE OF 200% OF THE RATED VOLTAGE FOR ONE MINUTE THRU A LIMITING RESISTANCE OF 1 - 5 OHMS PER VOLT.
7. TEMPERATURE RANGE: -55°C TO +85°C, AT RATED; TO +105°C,FULL RATING, WITH 50% VOLTAGE DERATING
8. CASE: POLYESTER PRESSURE TAPE WITH EPOXY ENDFILL.
9. LEAD MATERIAL: TINNED COPPERWELD WIRE.