Home | Company Profile | Site Map | Contact Us
Distributors | US. Mfg. Representatives | Foreign Sales Offices

NTC ThermistorsPTC ThermistorsFilm CapacitorsAmecon Magnetics

 BE2 SERIES

METALLIZED POLYCARBONATE RADIAL CAPACITORS
WRAP AND FILL WITH RADIAL LEADS


Click on image for larger image

 SPECIFICATIONS:
  1. CAPACITY: TABULATED
  2. TOLERANCE: SHALL BE INDICATED BY ONE OF THE FOLLOWING SUFFIXES; NONE ±20%, K ± 10%, J ± 5%, G±2%, AND F ± 1%.
  3. RATED WORKING VOLTAGE: TABULATED.
  4. DISSIPATION FACTOR: LESS THAN 0.5% AT 1KHz AND 25°C
  5. INSULATION RESISTANCE: SHALL EXCEED 25,000 MEG/MFD., AFTER TWO MINUTE CHARGE AT THE RATED VOLTAGE AND 25°C., NEED NOT EXCEED 50,000 MEGOHMS.
  6. DIELECTRIC STRENGTH: SHALL WITHSTAND A SURGE OF 150% OF THE RATED VOLTAGE FOR ONE MINUTE THRU A LIMITING RESISTANCE OF 1 - 5 OHMS PER VOLT.
  7. TEMPERATURE RANGE: -55°C TO 125°C.
  8. CASE: POLYESTER PRESSURE TAPE WITH EPOXY ENDFILLS.
  9. LEAD MATERIAL: TINNED COPPERWELD WIRE.
  10. MARKING: STANDARD COMMERCIAL PRACTICE.
THIS SPECIFICATION IS PRELIMINARY ONLY AND IMB RESERVES THE RIGHT TO ADJUST SPECIFIC DIMENSIONAL NOMINALS IF REQUIRED BY PRODUCTION RESULTS. THIS WOULD APPLY TO THE "LG" AND "LS" DIMENSIONS, PRIMARILY.

be2-a1.gif (6762 bytes)be2-a2.gif (5799 bytes)

Specifications
Back to Metallized Polycarbonate
Back to Film Capacitors Home Page

Home | Company Profile | Distributors | US. Sales Representatives | Foreign Sales Offices | Contact Us
NTC Thermistors | PTC Thermistors | Film Capacitors | Site Map

RTI Electronics, Inc. 1800 E. Via Burton St. Anaheim, CA 92806-1213
Telephone: (714) 765-8200 • Fax: (714) 765-8201