|

Click on image for larger image
|
SPECIFICATIONS:
- Construction: Extended foil type metallized mylar with
outer covering of polyolefin material, Ends are sealed
with epoxy.
- Capacity: Tabulated
- Physical dimenions: Tabulated
- Dissipation factor: Less than 1.0% when assured at
1 KHz and at 25°C.
- Insulation resistance: Shall exceed 10,000 MEG/MFD.
after a minute charge of rated voltage and 25°C. Need
not exceed 40,000 megohms.
- Dielectric strength: with charging current limited
to 5 MA., units shall withstand 1.5% rated voltage time
not to exceed two minutes.
- Temperature range: capacitors shall operate at full
rated voltage from -55 to +85°C, derate 50% to +125°C.
- Life Tests: Units shall withstand application of the
rated voltage at 125°C for 250 hours.
- Tolerance: Standard tolerance is ±20%, available to
±1%. Add appropriate suffix to part number: K ± 10%, J
±5%, F ±1%.
- Leads: shall be tinned copperweld wire, #24 AWG thru
#20 AVG. (see tabulation at below).
|